XL TOYS FORUM
http://www.xl-shop.com/forum/

Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)
http://www.xl-shop.com/forum/viewtopic.php?f=5&t=10379
Page 18 of 21

Author:  SKYWARP [ Sun Jan 13, 2013 5:09 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

zulzee wrote:
DX12 have no back pack like DX02?


Nope, bro. This is all the weapons DX12 comes with:

sticky bomb gun X 1

batarang x 2

hand grenade x 2

grapnel gun X 1

EMP gun x 1 (batteries included)

utility belt for mounting the grapnel gun

another utility belt for mounting the sticky bomb gun

No backpack, unfortunately. :?

Author:  KAIYODO [ Sun Jan 13, 2013 5:28 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

if want a complete Batty, best get the hot toys 1/4 TDKR Batman then you can have everything.....sonar light up eyes, back pack, emp gun sticky bomd gun etc..... :evil:

Author:  zulzee [ Sun Jan 13, 2013 5:57 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

SKYWARP wrote:
zulzee wrote:
DX12 have no back pack like DX02?


Nope, bro. This is all the weapons DX12 comes with:

sticky bomb gun X 1

batarang x 2

hand grenade x 2

grapnel gun X 1

EMP gun x 1 (batteries included)

utility belt for mounting the grapnel gun

another utility belt for mounting the sticky bomb gun

No backpack, unfortunately. :?


Ohh.. that's why everybody is looking for DX02 backpack to compliment their DX12... :Woo:

Author:  zulzee [ Sun Jan 13, 2013 5:59 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

KAIYODO wrote:
if want a complete Batty, best get the hot toys 1/4 TDKR Batman then you can have everything.....sonar light up eyes, back pack, emp gun sticky bomd gun etc..... :evil:


1:4 is too big la bro (look's like "berhala") :lol: :lol: :lol:

Author:  eastern [ Mon Jan 14, 2013 10:48 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

Bro BeastX,

Need your expertise advice on how to correct the PERS which has "crossed eye syndrome" with the minimal risk to the HS?

Looking forward for your advice soon.

Thanks.

Author:  derichong [ Mon Jan 14, 2013 11:00 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

eastern wrote:
Bro BeastX,

Need your expertise advice on how to correct the PERS which has "crossed eye syndrome" with the minimal risk to the HS?

Looking forward for your advice soon.

Thanks.


Found his advise from another forum.

http://www.onesixthwarriors.com/forum/sixth-scale-action-figure-news-reviews-discussion/456451-how-do-you-fix-dx-joker-pers-system.html

Author:  BeastX [ Mon Jan 14, 2013 11:38 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

derichong wrote:
eastern wrote:
Bro BeastX,

Need your expertise advice on how to correct the PERS which has "crossed eye syndrome" with the minimal risk to the HS?

Looking forward for your advice soon.

Thanks.


Found his advise from another forum.

http://www.onesixthwarriors.com/forum/sixth-scale-action-figure-news-reviews-discussion/456451-how-do-you-fix-dx-joker-pers-system.html


Unfortunately with DX12.... HT made it harder to access the eyes or the PERS system to repair it... I do not have DX02 or DX12 ... but I think it's glued in place and not screwed in like other PERS...

One mistake in gluing.... and too bad...

Author:  eastern [ Tue Jan 15, 2013 12:23 am ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

BeastX wrote:
derichong wrote:
eastern wrote:
Bro BeastX,

Need your expertise advice on how to correct the PERS which has "crossed eye syndrome" with the minimal risk to the HS?

Looking forward for your advice soon.

Thanks.


Found his advise from another forum.

http://www.onesixthwarriors.com/forum/sixth-scale-action-figure-news-reviews-discussion/456451-how-do-you-fix-dx-joker-pers-system.html


Unfortunately with DX12.... HT made it harder to access the eyes or the PERS system to repair it... I do not have DX02 or DX12 ... but I think it's glued in place and not screwed in like other PERS...

One mistake in gluing.... and too bad...



Thanks Bro Deric and Bro BeastX for the pointers.

Yes, the DX02 and DX12 is not direct as the DX01...which is much easier.
The PERS for DX02 and DX12 is embedded in the head, unlike the DX08 and DX09.
The damage for DX08 and DX09 can be minimized or reduced. I'm just afraid of this fragile stuff.

I noticed those guys the Sideshow Freaks having been removing the PERS..that looks like a massive operation.

Hopefully you get your hands on one and able to experiment on it.

Thanks again.

Author:  BeastX [ Tue Jan 15, 2013 1:36 pm ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

eastern wrote:
Thanks Bro Deric and Bro BeastX for the pointers.

Yes, the DX02 and DX12 is not direct as the DX01...which is much easier.
The PERS for DX02 and DX12 is embedded in the head, unlike the DX08 and DX09.
The damage for DX08 and DX09 can be minimized or reduced. I'm just afraid of this fragile stuff.

I noticed those guys the Sideshow Freaks having been removing the PERS..that looks like a massive operation.

Hopefully you get your hands on one and able to experiment on it.

Thanks again.


Ok, I was wrong on the glueing.... look at the video around 4.00 minutes in...

http://www.youtube.com/watch?v=3qF2dPsq0i4

Author:  eastern [ Wed Jan 16, 2013 7:00 am ]
Post subject:  Re: Hot Toys - DX12 - TDKR: 1/6 Batman (a.k.a. DX02 2.0)

BeastX wrote:

Ok, I was wrong on the glueing.... look at the video around 4.00 minutes in...

http://www.youtube.com/watch?v=3qF2dPsq0i4


Thanks BeastX, will try this during the weekend.

Page 18 of 21 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/